,

Laser Enquipment Parts Honeycomb Working Table For CO2Cutting Machine/Laser Engraver TTS 80W 320×220/300×300/400×400/430x400mm

Availability:

200 in stock


$51.99

300x200x22mm300x300x16mm300x300x22mm320x220x22mm400x400x22mm430x400x22mm
ChinaCzech RepublicFranceGERMANYItalyRussian FederationSPAIN
Honeycomb WorkbenchWorkbench Kit
Clear

Features: 100% brand new and high quality
Laser- enquipment parts honeycomb working table for CO2 laser- engraver cutting machine for Co2 laser- engraving and cutting machine
High quality aluminum alloy honeycomb table for CO2 laser- engraver cutting machine, DIY laser- enquipment part
.Fine workmanship, the surface is flat and smooth.
.Strong and stable, be suitable for a big working area and can be supported by heavy material than the aluminum table.
.Wide range of uses including structural support, energy absorption, light diffusion, airflow and much more.

Specification: For: Co2 Laser- Engraving and Cutting Machine
Material: Aluminum(frame) and galvanized steel(body)
Diameter of table hole: 8-10mm
Thickness of Honeycomb Board : 22mm
Dimension One:approx. 300x300x22mm/11.81×11.81×0.87in
Dimension Two : approx. 300x220x22mm/11.81×8.66×0.87in
Dimension Three :approx. 400x400x22mm/15.75×15.75×0.87in
Dimension Four :approx. 430x400x22mm/16.93×15.75×0.87in (Optional)
Frame Color: Black

Package Includes: 1 x Aluminum Honeycomb Working Table

note: 1.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
2.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

Compared with other products,

our honeycomb panel s have higher flatness

Black surface treatment, longer service life

Shock-absorbing feet prevent the honeycomb panel from shifting. Because the back of the product will not be completely cut due to lack of oxygen during cutting, the shock-absorbing foot pad increases the honeycomb panel to create a void at the bottom and increases the air at the bottom.At the same time, you can observe whether the objects are completely cut through the gap.

The aluminum plate protects the desktop during cutting to prevent damage to the desktop or fire caused by laser irradiation

With its own measuring scale,you can measure the size of items at any time without looking for a measuring ruler

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Laser Enquipment Parts Honeycomb Working Table For CO2Cutting Machine/Laser Engraver TTS 80W 320×220/300×300/400×400/430x400mm”

There are no reviews yet.